Fitted with an industry standard 2 Pin “Deutsch” IP68 Receptacle Connector
Fully Identical and Compatible with OEM Part #
CAT Part #: 146-5804
Komatsu Part #: 58F-54-20452
The Federal Signal 24VDC Electric Air Horn is a widely utilised horn for signalling between machines in a smaller mining or construction industries where standard electric horns are not sufficient but where the high loudness of our HS01K Air Horn Systems are too loud.
Model 52 resonating horn is ideal for penetrating high ambient noise levels. Being electrically activated, Model 52 does not require an expensive air compressor for operation. It is able to withstand the shocks, vibrations, dust, and atmospheric conditions encountered in off-road use. Rubber gaskets and a power connector make Model 52 completely watertight. The projector and internal parts are made to resist corrosion; the exterior is sealed with gray, enamel paint, and the housing is diecast aluminium. Model 52 has a duty cycle of five minutes on and five minutes off. Used by many major manufacturers of construction equipment, Model 52 resonating horns suit the warning needs of any off-road vehicle working in a high noise environment
Loudness: 124 dBa (@ 1m, 1atm), 114 dBa (@ 10m, 1atm)
Voltage: 24VDC
Connector: “Deutsch” 2 Pin DTP Receptacle IP68
Wire: 14AWG Tin Plated
Shock and vibration tolerant
Surface mount with flanges
Type 3R enclosure
Fitted with an industry standard 2 Pin “Deutsch” IP68 Receptacle Connector
Fully Identical and Compatible with OEM Part #
CAT Part #: 146-5804
Komatsu Part #: 58F-54-20452
The Federal Signal 24VDC Electric Air Horn is a widely utilised horn for signalling between machines in a smaller mining or construction industries where standard electric horns are not sufficient but where the high loudness of our HS01K Air Horn Systems are too loud.
Model 52 resonating horn is ideal for penetrating high ambient noise levels. Being electrically activated, Model 52 does not require an expensive air compressor for operation. It is able to withstand the shocks, vibrations, dust, and atmospheric conditions encountered in off-road use. Rubber gaskets and a power connector make Model 52 completely watertight. The projector and internal parts are made to resist corrosion; the exterior is sealed with gray, enamel paint, and the housing is diecast aluminium. Model 52 has a duty cycle of five minutes on and five minutes off. Used by many major manufacturers of construction equipment, Model 52 resonating horns suit the warning needs of any off-road vehicle working in a high noise environment
Loudness: 124 dBa (@ 1m, 1atm), 114 dBa (@ 10m, 1atm)
Voltage: 24VDC
Connector: “Deutsch” 2 Pin DTP Receptacle IP68
Wire: 14AWG Tin Plated
Shock and vibration tolerant
Surface mount with flanges
Type 3R enclosure
